What is Smooth-On XTC-3D™ 20 used for?

Smooth-On XTC-3D™ 20 is primarily used for coating 3D printed objects to enhance their finish and strength. This silicone rubber is particularly effective in filling in layer lines and imperfections in 3D prints, providing a smooth, professional appearance. It's ideal for artists, model makers, and hobbyists who want to create visually striking pieces, such as miniatures, prototypes, or special effects for film. Using XTC-3D can dramatically improve the quality of your prints and extend their lifespan.

How do I apply Smooth-On XTC-3D™ 20?

To apply Smooth-On XTC-3D™ 20, first ensure your 3D print is clean and free from any dust or oils. Mix equal parts of the resin and hardener as per the instructions, then use a brush or spatula to coat the surface. The application should be done in thin layers to facilitate even curing and to avoid drips. Once coated, let it cure for the recommended time, typically 24 hours. This product allows for corrections during the curing process as well, making it user-friendly for various projects.

What surfaces can I use Smooth-On XTC-3D™ 20 on?

Smooth-On XTC-3D™ 20 can be used on a variety of surfaces, including PLA, ABS, PETG, and other common 3D printing materials. It adheres well to plastic, wood, and even fabric, making it versatile for multiple applications. This allows users to enhance not just 3D prints but also crafts and mixed-media artworks. Given its broad compatibility, it’s a valuable resource for anyone looking to optimize their creative projects.

Is Smooth-On XTC-3D™ 20 safe to use?

Yes, Smooth-On XTC-3D™ 20 is safe to use, but it's important to follow safety precautions. Always use it in a well-ventilated area and wear gloves and a mask to protect your skin and lungs. Even though it is low in toxicity, prolonged contact or inhalation of vapors should be avoided. Proper handling ensures a safe application process, allowing you to focus on your creative endeavors without unnecessary risks.

How long does it take to cure Smooth-On XTC-3D™ 20?

Smooth-On XTC-3D™ 20 typically cures within 24 hours, but working time is approximately 30 minutes before it begins to thicken. Factors such as temperature and humidity may affect curing times, so make sure conditions are optimal. It's important to leave your coated project undisturbed for at least 24 hours to achieve maximum strength and finish. Many users find that curing times can be shortened in warmer environments, thus optimizing their project timelines.

Can I paint over Smooth-On XTC-3D™ 20?

Absolutely! Once Smooth-On XTC-3D™ 20 has fully cured, it can be painted over with acrylic or oil-based paints. This makes it ideal for artists looking to add a personalized finish to their projects. Ensure the surface is clean and dry before applying paint for the best adhesion. Using paints after coating enhances the aesthetics of your 3D prints, allowing for customization and unique artistic expressions.

What is the shelf life of Smooth-On XTC-3D™ 20?

The shelf life of Smooth-On XTC-3D™ 20 is typically about 1 year when stored properly in a cool, dry place. Ensure that both components are tightly sealed and kept away from direct sunlight to maintain their usability. Even after this period, the product may still be usable if it has been stored correctly, but it’s always best to check for consistency and odor before use. This longevity allows you to use it over multiple projects without fear of wastage.

What kind of finish will I get with Smooth-On XTC-3D™ 20?

Using Smooth-On XTC-3D™ 20 will give your 3D prints a glossy and smooth finish, drastically improving the aesthetic appeal of the final product. It fills in gaps and imperfections while enhancing the depth of details. This is especially beneficial for display pieces, props, and models that need to stand out. The transformation it can provide significantly elevates the quality of your work, making it look professional and polished.

Is Smooth-On XTC-3D™ 20 good for outdoor use?

Smooth-On XTC-3D™ 20 is not specifically formulated for prolonged outdoor exposure, as UV rays can degrade the silicone over time. However, it can still be used for outdoor projects if they are not subjected to harsh weather conditions and are maintained properly. For projects intended for outdoor use, consider applying an additional UV-protective coating after the XTC-3D has cured to improve longevity and UV resistance.

Where can I buy Smooth-On XTC-3D™ 20 in Germany?

You can buy Smooth-On XTC-3D™ 20 Mold Making & Special Effects Silicone Rubber, 3D Print Coating - 6.4 oz from Ubuy. They offer a wide range of products, ensuring that you can easily find and purchase this item for your 3D printing needs. Ubuy is known for its customer service and ease of acquisition, making it a reliable choice for sourcing specialty items within Germany.

Wie kaufe ich Smooth-On XTC-3DTM 3D Print Coating & Smoothing online bei Ubuy ein?

Es ist ganz einfach, Smooth-On XTC-3DTM 3D Print Coating & Smoothing online bei Ubuy einzukaufen.. Sie müssen nur nach dem Produkt suchen, beim Bezahlen Ihre Versandart auswählen und es an Ihren Standort liefern lassen.

Ist Smooth-On XTC-3DTM 3D Print Coating & Smoothing in Germany zum Online-Shoppen verfügbar?

Ja, bei Ubuy Germany können Sie dieses Produkt zu einem angemessenen Preis kaufen.. Das Smooth-On XTC-3DTM 3D Print Coating & Smoothing ist lokal nicht verfügbar, aber Sie können uns unseren Expressversandservice anvertrauen.

Wie lange dauert es nach der Bestellung, bis ich das Produkt erhalte?

Die Lieferzeit Ihres bestellten Produkts hängt davon ab, was Sie bestellt haben und welche Versandart Sie gewählt haben.. Die voraussichtliche Lieferzeit wird während des Bestellvorgangs angegeben. Seien Sie also beim Einkaufen unbesorgt.

Smooth-On Original sehen

Smooth-On XTC-3DTM 3D Print Coating & Smoothing Epoxy - 6.4 oz

XTC-3D is the perfect solution for giving your 3D prints a professional finish and truly bringing them to life

Smooth-On

Artikelnr.: 45611622

Smooth-On XTC-3DTM 3D Print Coating & Smoothing Epoxy - 6.4 oz

90% der Befragten würden dies einem Freund empfehlen

Artikelnr.: 45611622

€ 28

Price Details

Ohne Versand- und Zollkosten ( Versand- und Zollkosten werden an der Kasse berechnet )

^{*Alle Artikel werden aus USA importiert}

300+ gekauft

Verfügbarkeit : Auf Lager

Vom USA Store für Sie importiert

QTY:

Bestellen Sie jetzt und erhalten Sie es am Samstag, August 29

Gesicherte Transaktion

Unsere besten Logistigpartner

XTC-3D is the perfect solution for giving your 3D prints a professional finish and truly bringing them to life

6.4 Oz. Unit

24 Oz. Unit

U-Care-Garantie:

Keine

Wählen Sie einen Plan aus

Jetzt Kaufen, Später Bezahlen

Fast
Shipping

Kostenlose
Rücksendung^*

Sichere Verpackung

100 % Originalprodukte

PCI DSS-Standards

ISO 27001-zertifiziert

Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Jetzt kaufen.

Besondere Merkmale

Versatile Coating

XTC-3D™ offers a unique coating solution for 3D prints, enhancing surface quality while preserving intricate details, making it ideal for both amateur and professional projects.

Easy Application

This silicone rubber is user-friendly, requiring no complicated processes or additional tools. Its straightforward application ensures quick results, saving time for creators at any skill level.

Durable Finish

Provides a robust protective layer that resists wear and tear. This product not only protects prints but also elevates their appearance, offering lasting value and high-quality results.

Produktdetails

High-Performance 3D Print Coating - Clear top coat for smoothing & finishing 3D printed parts.
Ideal for application to both SLA & SLS prints, as well as PLA, ABS, Laywoo, Powder Printed Parts, and other rigid media.
Mix Ratio of 2A:1B by Volume -Working time of 10 minutes - Cures to hard, impact-resistant coating in 3.5 hours - 80D Shore Hardness.
Epoxy top coating self-levels and wets out uniformly without leaving brush strokes; offers excellent coverage.
Perform a small-scale test of your project materials to determine suitability and compatibility. Refer to the technical bulletin for more information - available on our website

Package Weight

3.04 Pound

Product Technical Details

Product Dimensions	‎2 x 3.5 x 6.8 inches
Item Weight	‎10.2 ounces
Manufacturer	‎Smooth-On, Inc.
Item model number	‎xtc3d

Für wen ist das Produkt geeignet?

3D Print Enthusiasts
Ideal for individuals wanting to enhance and protect their 3D printed models with a durable silicone coating.
Special Effects Artists
Useful for artists needing a reliable silicone for creating detailed molds and effects on various surfaces.
DIY Project Makers
Great for hobbyists seeking to create custom molds or replicas for personal projects in arts and crafts.

Beginners
Not suitable for newcomers to molding techniques who may find the application process complex and challenging.

PRODUKTBESCHREIBUNG

Haben Sie eine Frage? Mit uns chatten

Kundenfragen und -antworten

Frage: Wie kaufe ich Smooth-On XTC-3DTM 3D Print Coating & Smoothing online bei Ubuy ein?

Antworten: Es ist ganz einfach, Smooth-On XTC-3DTM 3D Print Coating & Smoothing online bei Ubuy einzukaufen.. Sie müssen nur nach dem Produkt suchen, beim Bezahlen Ihre Versandart auswählen und es an Ihren Standort liefern lassen.
Frage: Ist Smooth-On XTC-3DTM 3D Print Coating & Smoothing in Germany zum Online-Shoppen verfügbar?

Antworten: Ja, bei Ubuy Germany können Sie dieses Produkt zu einem angemessenen Preis kaufen.. Das Smooth-On XTC-3DTM 3D Print Coating & Smoothing ist lokal nicht verfügbar, aber Sie können uns unseren Expressversandservice anvertrauen.
Frage: Wie lange dauert es nach der Bestellung, bis ich das Produkt erhalte?

Antworten: Die Lieferzeit Ihres bestellten Produkts hängt davon ab, was Sie bestellt haben und welche Versandart Sie gewählt haben.. Die voraussichtliche Lieferzeit wird während des Bestellvorgangs angegeben. Seien Sie also beim Einkaufen unbesorgt.

Smooth-On Paints & Primers ‎xtc3d Editorial Review

Smooth-On XTC-3DTM 3D Print Coating & Smoothing Epoxy - 6.4 oz is a versatile coating solution that enhances the surface of 3D printed items. It mixes easily with a provided measuring cup and applies smoothly, making it ideal for those looking to save time on finishing techniques traditionally involving sanding or vapor smoothing. Users have praised its ability to provide a glossy finish and significantly reduce priming time for materials like Worbla. However, it’s noteworthy that once cured, it lacks flexibility, which may lead to cracking on flexible materials. Proper mixing and application techniques are essential for achieving a flawless finish, and with practice, this epoxy can yield impressive results.

Kundenbewertungen

4.4

1591 Kundenbewertungen

5 Sterne

70%
4 Sterne

16%
3 Sterne

7%
2 Sterne

3%
1 Sterne

4%

Bewerten Sie dieses Produkt

Teilen Sie Ihre Meinung mit anderen Kunden

Vorteile

Easy to mix and apply for beginners
Provides a glossy, smooth finish
Reduces priming time significantly
Ideal for cosplay and 3D prints
Good for rigid surfaces and hard materials

Nachteile

Mixing cup quality could be improved, may warp

Produktpreisverlauf

Wichtige Information

Einschränkungen: Für international versandte Produkte beachten Sie bitte, dass jegliche Herstellergarantie nicht gültig sein könnte; Herstellerservice-Optionen nicht verfügbar sein könnten; Produkthandbücher, Gebrauchsanleitungen und Sicherheitshinweise nicht in der Sprache des Ziellandes verfasst sein könnten; die Produkte (und Begleitmaterialien) könnten nicht im Einklang mit den Standards, Spezifizierungen und Etikettierungsvorgaben des Ziellandes entworfen sein; und die Produkte könnten nicht der Voltzahl und anderen elektrischen Standards des Ziellandes entsprechen (weshalb, falls zutreffend, die Verwendung eines Adapters oder Umwandlers erforderlich sein könnte). Der Empfänger ist dafür verantwortlich sicherzustellen, dass das Produkt legal in das Zielland importiert werden kann. Bei der Bestellung von Ubuy oder seinen Partnern ist der Empfänger der eingetragene Importeur und muss sich an alle Gesetze und Regulierungen des Ziellandes halten.
Nicht alle auf Ubuy aufgeführten Produkte werden zum Verkauf angeboten, da Ubuy eine globale Suchmaschine ist. Produkte unterliegen Export-/Handelsbestimmungen.

€ 28

Bestellen Sie jetzt und erhalten Sie es am Samstag, August 29

QTY:

Gesicherte Transaktion

PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.

Unsere besten Logistigpartner

Schnellste grenzüberschreitende Lieferung

Merkmale und Vorteile

High-performance 3D print coating
Smooths and finishes 3D printed objects
Compatible with FDM, SLA, and SLS prints
1oz covers 100 sq inches
Works with a wide range of materials
Ideal for coating various surfaces

Ubuy Assurance

Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns ^*, and secure packaging on every order.

Smooth-On XTC-3DTM 3D Print Coating & Smoothing Epoxy - 6.4 oz

€ 28

Jetzt Kaufen, Später Bezahlen

Fast Shipping

Kostenlose Rücksendung*

Sichere Verpackung

100 % Originalprodukte

PCI DSS-Standards

ISO 27001-zertifiziert

Besondere Merkmale

Produktdetails

Product Technical Details

Für wen ist das Produkt geeignet?

PRODUKTBESCHREIBUNG

Kundenfragen und -antworten

Smooth-On Paints & Primers ‎xtc3d Editorial Review

Kundenbewertungen

Bewerten Sie dieses Produkt

Vorteile

Nachteile

Produktpreisverlauf

Wichtige Information

€ 28

Merkmale und Vorteile

Ubuy Assurance

Fast
Shipping

Kostenlose
Rücksendung^*